SAP HANA environment operations via CLI 

The operations explained in this documentation section can be performed through the Delphix Engine’s Command Line Interface (CLI) too. The available operations are as follows: 

• Create & Discover 

• Update 

• Refresh 

• Disable 

• Enable 

• Delete 

Prerequisites 

To run any of the following commands, login to the Delphix Continuous Data Engine’s CLI with the admin user account. 

Example 

ssh admin@<CONTINUOUS-DATA-FQDN-or-IP>

Creating & discovering the environment 

Run the following commands to discover the environment. 

Example 

environment 
create 
set hostEnvironment.name=rh86-hana2sp6-s1 
set hostParameters.host.address=rh86-hana2sp6-s1.dlpxdc.co 
set hostParameters.host.toolkitPath=/tmp 
set primaryUser.name=hdbadm 
set primaryUser.credential.password=hana 
commit

Updating the environment 

Run the following commands to update the environment. 

The name of the environment can be updated from rh86-hana2sp6-s1 to rh86-hana2sp6-s1.dlpxdc.co using the following command. 

Example 

environment 
select rh86-hana2sp6-s1 
update 
set name=rh86-hana2sp6-s1.dlpxdc.co 
commit

Refreshing the environment 

Run the following commands to refresh the environment. 

Example 

environment 
select rh86-hana2sp6-s1.dlpxdc.co 
refresh 
commit

Disabling the environment 

Run the following commands to disable the environment. 

Example  

environment 
select rh86-hana2sp6-s1.dlpxdc.co 
disable 
commit

Enabling the environment 

Run the following commands to enable the environment. 

Example 

environment 
select rh86-hana2sp6-s1.dlpxdc.co 
enable 
commit

Deleting the environment 

Run the following commands to delete the environment. 

Example 

environment 
select rh86-hana2sp6-s1.dlpxdc.co 
delete 
commit