Known issues (SAP HANA)
Release 2025.1.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.6
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.5
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.4
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.3
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.2
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.1
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.3.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.2.1
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.2.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.1.1
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.1.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
dSource tenant database can be accessed and written onto |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.0.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
Dsource tenant database can be accessed and written onto |
None |
|
CTCHANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None |
|
CTCHANA-1610 |
'test_force_disable_enable_vdb' fails across multiple images |
None |
Release 6.0.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
DLPX-75383 |
Refresh/Disable not working after failed delete operation |
Force delete the VDB. Manually remove the mount point |
|
DLPX-75385 |
Undo Refresh operation after a failed Refresh job leads to 502 Bad gateway and management stack restart |
None |
|
DLPX-67911 |
Failed enable operation leaving a mount point and next delete operation creating a stale file handle |
Manually remove the mount point |
|
CTCHANA-1599 |
Mount Point change not detected by the plugin may lead to multiple mounts |
Mount point not in use can be removed manually |
|
CTCHANA-1598 |
Plugin loses control in case of user cancel operation. |
Manual cleanup can be done in case the plugin leaves any tenant database/files on the VM |
|
CTCHANA-1586 |
Refresh after a Force disable on a VDB fails with 'mount not empty' error |
Manually remove the mount before proceeding with the Refresh |
|
CTCHANA-1565 |
Stop/Start operation on a VDB post failed post_refresh hook fails with inappropriate error |
None |
|
CTCHANA-1514 |
Dsource tenant database can be accessed and written onto |
None |
|
CTCHANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None |
Release 4.3.2
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None |
|
DLPX-44359 |
Job cancellation may fail. |
None |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1/4.1.2/4.2.0 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |
Release 4.3.1
|
Delphix Ticket Number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None. |
|
DLPX-44359 |
Job cancellation may fail. |
None. |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1/4.1.2/4.2.0 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |
Release 4.3.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None. |
|
DLPX-44359 |
Job cancellation may fail. |
None. |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1/4.1.2/4.2.0 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |
Release 4.2.0
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None. |
|
DLPX-44359 |
Job cancellation may fail. |
None. |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1/4.1.2/4.2.0 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |
Release 4.1.2
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None. |
|
DLPX-44359 |
Job cancellation may fail. |
None. |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1/4.1.2 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |
Release 4.1.1
|
Delphix ticket number |
Summary |
Workaround/Comments |
|---|---|---|
|
HANA-821 |
HANA SQL Port value should remain consistent for the life of VDB. |
None. |
|
DLPX-44359 |
Job cancellation may fail. |
None. |
|
CTCHANA-930 |
Upgrade from 3.4.5 to 3.5.0/3.5.1/4.0.0/4.1.1 needs a manual deletion of the existing tenant databases for disable/enable to work. |
Drop the tenant database manually before enabling the VDB. |